WIKA
LS-10
General submersible pressure / level measurement
Candidate enquiry path: SLV-420
Compare calibrated pressure span, density basis, cable jacket/length and actual dimensions; source performance does not qualify the candidate.
Read the original maker reference ↗
Request review of LS-10 ↗WIKA
IL-10
Intrinsic-safety submersible application
Candidate enquiry path: SLV-EX
Obtain full marking, certificate conditions and barrier/control drawing. An SLV code cannot inherit the IL-10 approval.
Read the original maker reference ↗
Request review of IL-10 ↗WIKA
LH-10
High-performance submersible reference
Candidate enquiry path: REVIEW
Provide the exact legacy datasheet and installed nameplate. Do not infer lifecycle status or a successor from a similar model number.
Original model enquiry; lifecycle not asserted
Read the original maker reference ↗
Request review of LH-10 ↗WIKA
LH-20
Submersible model reference in the original maker catalogue
Candidate enquiry path: REVIEW
Supply the full configured datasheet, output, materials, pressure reference and installation dimensions. No stock, lifecycle or interchangeability claim is inferred.
Read the original maker reference ↗
Request review of LH-20 ↗Endress+Hauser
Waterpilot FMX21
Hydrostatic level family with application variants
Candidate enquiry path: REVIEW
Check cell/wetted materials, optional temperature/HART functions and any drinking-water or hazardous-area requirements.
Read the original maker reference ↗
Request review of Waterpilot FMX21 ↗Endress+Hauser
Waterpilot FMX167
Earlier Waterpilot generation
Candidate enquiry path: REVIEW
Original maker points buyers to its newer-generation section. Obtain the original order code and drawings; this does not establish an SLV equivalent.
Original maker references a newer generation
Read the original maker reference ↗
Request review of Waterpilot FMX167 ↗KELLER
LevelRat
Wastewater / lift-station application
Candidate enquiry path: SLV-WW
Compare the actual sensing face, fouling service, output and required approved circuit. Candidate wastewater geometry and approval need separate evidence.
Read the original maker reference ↗
Request review of LevelRat ↗KELLER
Microlevel
Small-bore level measurement
Candidate enquiry path: SLV-BH16
The original combines current and RS485 functions; a single-output candidate is not functionally identical. Check clear casing ID, units and software/register compatibility.
Read the original maker reference ↗
Request review of Microlevel ↗KELLER
Acculevel
Submersible family; exact configured functions to confirm
Candidate enquiry path: REVIEW
Identify the exact material, pressure reference, signals, cable and approval variant using the original configured datasheet; do not infer them from the family name.
Read the original maker reference ↗
Request review of Acculevel ↗VEGA
VEGAWELL 52
Hydrostatic water / wastewater family
Candidate enquiry path: SLV-WW
Check exact diaphragm/cell, materials, pressure reference, signal/HART variant, mounting and approvals; wastewater service alone is insufficient.
Read the original maker reference ↗
Request review of VEGAWELL 52 ↗Dwyer
PBLT2
Caged diaphragm for wastewater / slurry
Candidate enquiry path: SLV-WW
Caged and flush-face constructions are different. Identify PBLT2 versus PBLTX and all approval/cable suffixes before comparing.
Read the original maker reference ↗
Request review of PBLT2 ↗Dwyer
PBLTX
Intrinsic-safety wastewater transmitter enquiry
Candidate enquiry path: SLV-EX
Review the exact original marking, caged diaphragm, associated apparatus, cable and control drawing. The proposed SLV path has no inherited certification.
Read the original maker reference ↗
Request review of PBLTX ↗Dwyer
SBLT2
Atmospheric hydrostatic level measurement
Candidate enquiry path: SLV-420
Supply full suffix, proof pressure, cable material and installed wiring. Safety/approval versions require a complete approved-circuit review.
Read the original maker reference ↗
Request review of SBLT2 ↗Dwyer
MBLT
Miniature submersible family
Candidate enquiry path: SLV-BH16
A nominal small diameter is not guaranteed casing clearance or a matched pressure span. Confirm actual drawing, output and cable route.
Read the original maker reference ↗
Request review of MBLT ↗Siemens
SITRANS LH100
Two-wire hydrostatic level family
Candidate enquiry path: SLV-420
Check the configured approvals, moisture-reference arrangement, range and all materials; any approved version needs its own circuit assessment.
Read the original maker reference ↗
Request review of SITRANS LH100 ↗Druck
PTX1830
Environmental hydrostatic pressure reference
Candidate enquiry path: REVIEW
Supply exact materials, body drawing, output and pressure reference. Titanium or narrow-well candidates are reviewed only after those details are known.
Read the original maker reference ↗
Request review of PTX1830 ↗