HYDROSTATIC LEVEL MEASUREMENT[email protected]
≋SubmersibleLevelPROBES · CABLES · INTEGRATION
Menu

04 / GROUNDWATER MONITORING / SLV-BH16

Slim Borehole & Deep-Well Level Transmitters

Define casing clearance, installed sensor depth and expected water column independently before choosing a slim probe.

Ø16 / Ø12 mm targets · reinforced vented cable

Slim borehole & deep-well probes functional concept; dimensions and construction to confirm
Conceptual engineering illustration, not a product photograph or approved dimensional drawing.

Boreholes, narrow wells and groundwater monitoring

A 200 m drilled well does not necessarily need a 200 m liquid-head measuring span.

Surge protection does not make an installation lightning-proof. Cable length, strength, maximum submergence and measuring range are separate specifications.

Define the configuration before the quotation

  • Ø16 mm and Ø12 mm are enquiry targets; confirm the actual drawing for each pressure range.
  • 50, 100, 200 and 500 m H₂O spans are requests for qualification, not all guaranteed in every diameter.
  • Request reinforced PUR cable, strain relief and documented surge protection with proper earthing.

THREE INPUTS THAT MAKE THE REVIEW USEFUL

Bring the installation into the specification.

01

Borehole casing clear ID and other installed equipment

02

Sensor installation depth, lowest/highest water levels and cable route

03

Cable tensile/load limits and required surge test evidence

SPECIFY THE COMPLETE INSTALLATION

One probe. A considered cable & termination kit.

Indicative accessory allowances in USD. Probe, freight and tax are excluded. Final compatibility and pricing require a written quote.

Accessory budget allowance$84Cable increments reflect selected length tiers, not a uniform per-metre tariff.

Need cable longer than 200 m? Enter the custom length and installation depth in your RFQ for a separate quote.

Include this configuration in my RFQ ↗

KEEP THE WHOLE LOOP IN VIEW

From probe selection to dry cable termination.

Before you specify SLV-BH16

Is this a released stock model?

SLV-BH16 identifies an enquiry configuration family. Ask for the exact configured datasheet, materials, drawing and calibration acceptance criteria before placing an order.

Can I order cable length independently from range?

Yes, specify both independently. Cable must cover the installed route and service allowance; measuring range covers liquid head above the probe. The quote confirms maximum immersion and cable load.

START WITH THE INSTALLATION

Liquid. Depth. Cable. Signal.

Send these four inputs to start a configuration review.

Request an engineering quote ↗