02 / SEWAGE & WET WELLS / SLV-WW
Wastewater Lift-Station & Tank Level Transmitters
Review a broad flush sensing face and stable mounting for liquid level in wastewater lift stations.
Flush-face concept · weighted body option
Municipal sewage, wet wells and sludge-bearing tanks
Reduce debris-catching recesses while keeping the diaphragm accessible for inspection.
A broad diaphragm can reduce fouling risk; no sensor is guaranteed never to clog. Do not scrape or pressure-jet the diaphragm without approved cleaning instructions.
Define the configuration before the quotation
- Specify actual solids, rags, grease, turbulence and chemical cleaning conditions.
- Ceramic or coated diaphragm concepts need abrasion, impact and material checks.
- Weighted-body and restraint options require mounting and cable-load review.
THREE INPUTS THAT MAKE THE REVIEW USEFUL
Bring the installation into the specification.
Cleaning access and planned maintenance interval
Hazardous-area classification and exact required approvals
Reviewing a LevelRat or VEGAWELL installation?
For a level rat transducer replacement enquiry, supply the full installed model and datasheet. Compare calibrated span, overload, pinout, power, cable venting, diaphragm material, dimensions and hazardous-area approval. Keller LevelRat and VEGA VEGAWELL are third-party references; SubmersibleLevel claims no affiliation or verified drop-in equivalence.
Read the original KELLER LevelRat product information ↗SPECIFY THE COMPLETE INSTALLATION
One probe. A considered cable & termination kit.
Indicative accessory allowances in USD. Probe, freight and tax are excluded. Final compatibility and pricing require a written quote.
Need cable longer than 200 m? Enter the custom length and installation depth in your RFQ for a separate quote.
Include this configuration in my RFQ ↗KEEP THE WHOLE LOOP IN VIEW
From probe selection to dry cable termination.
Before you specify SLV-WW
Is this a released stock model?
SLV-WW identifies an enquiry configuration family. Ask for the exact configured datasheet, materials, drawing and calibration acceptance criteria before placing an order.
Can I order cable length independently from range?
Yes, specify both independently. Cable must cover the installed route and service allowance; measuring range covers liquid head above the probe. The quote confirms maximum immersion and cable load.
START WITH THE INSTALLATION
Liquid. Depth. Cable. Signal.
Send these four inputs to start a configuration review.