HYDROSTATIC LEVEL MEASUREMENT[email protected]
≋SubmersibleLevelPROBES · CABLES · INTEGRATION
Menu

SUBMERSIBLELEVEL / ENGINEERING SUPPORT

Vented Cable, Desiccant Boxes & Cable Hangers

Specify vented PUR/FEP cable, a serviceable desiccant breather junction box, strain-relief hanger and compatible tank level indicator.

$58 allowance

Vented desiccant junction box

A serviceable atmospheric breather and replaceable desiccant help manage vent moisture. Confirm IP66 target rating for the complete enclosure and install above flood level.

$26 allowance

316 stainless suspension clamp

Relieve suspended cable weight without loading electrical conductors or crushing the vent tube. Confirm cable diameter and load rating.

$145 allowance

Digital level indicator / controller

Review input signal, supply, relay logic and engineering units. Volume display requires tank geometry; pump protection requires installation-specific design.

PUR or FEP cable. Length is a separate specification.

PUR/PE additional-length allowances: 10/20/50/100/200m are +$12/$35/$90/$185/$370. FEP: 10/20/30/50m are +$28/$78/$128/$225 relative to its matched 5m base assembly. A FEP upgrade to another base assembly is quoted separately; custom lengths need review.

For longer runs, submit actual installation depth, routing, service loop, required tensile capacity and signal type. Do not equate maximum liquid head with total cable length.

Functional cable and atmospheric vent concept

CONFIGURE YOUR PROBE & TERMINATION

One complete specification.
One clear quote request.

Set liquid head, density, signal and the installed cable route. The configuration code carries these choices into your engineering request.

ENQUIRY CONFIGURATION CODESLV-420-2M-SG1-420-PUR5-JBX-CLP
Indicative allowance per probe kit$84Probe, freight and tax excluded. Length prices apply to a matched base assembly; no generic first-5m FEP upgrade is free.

This code requests a configuration; the written quotation defines released dimensions, materials, approvals and availability.

Include this configuration in my RFQ ↗
Engineering accessories — indicative per probe kit

Bellows and desiccant options need a compatible compensation/vent design. Surge ratings, clamp load and controller functions are confirmed for the selected assembly.

KEEP THE WHOLE LOOP IN VIEW

From probe selection to dry cable termination.