HYDROSTATIC LEVEL MEASUREMENT[email protected]
≋SubmersibleLevelPROBES · CABLES · INTEGRATION
Menu

03 / CORROSIVE LIQUIDS / SLV-PTFE

PTFE / Teflon Chemical Submersible Level Transmitters

Start with liquid concentration and temperature to specify PTFE housing, ceramic diaphragm and FEP vented cable.

PTFE housing · ceramic face · FEP cable targets

PTFE chemical probes functional concept; dimensions and construction to confirm
Conceptual engineering illustration, not a product photograph or approved dimensional drawing.

Qualified acids, alkalis and plating process liquids

Compatibility belongs to the complete wetted assembly, not the housing alone.

PTFE and Teflon terminology does not establish universal chemical resistance or a particular branded resin. No blanket approval for concentrated acids is implied.

Define the configuration before the quotation

  • Request PTFE housing and FEP cable as a configuration; confirm every seal and diaphragm material.
  • Sulfuric acid, hydrochloric acid and sodium hypochlorite require concentration and temperature assessment.
  • Review chemical permeation, cleaning and cable termination before approving continuous immersion.

THREE INPUTS THAT MAKE THE REVIEW USEFUL

Bring the installation into the specification.

01

Exact chemical composition and concentration by mass

02

Normal/maximum temperature and cleaning cycle

03

All wetted parts, seals, cable jacket and immersion conditions

SPECIFY THE COMPLETE INSTALLATION

One probe. A considered cable & termination kit.

Indicative accessory allowances in USD. Probe, freight and tax are excluded. Final compatibility and pricing require a written quote.

Accessory budget allowance$84 + FEP cable quoteHardware accessories only. FEP cable is excluded and quoted separately by length.

Need cable longer than 200 m? Enter the custom length and installation depth in your RFQ for a separate quote.

Include this configuration in my RFQ ↗

KEEP THE WHOLE LOOP IN VIEW

From probe selection to dry cable termination.

Before you specify SLV-PTFE

Is this a released stock model?

SLV-PTFE identifies an enquiry configuration family. Ask for the exact configured datasheet, materials, drawing and calibration acceptance criteria before placing an order.

Can I order cable length independently from range?

Yes, specify both independently. Cable must cover the installed route and service allowance; measuring range covers liquid head above the probe. The quote confirms maximum immersion and cable load.

START WITH THE INSTALLATION

Liquid. Depth. Cable. Signal.

Send these four inputs to start a configuration review.

Request an engineering quote ↗