06 / FUEL & CLASSIFIED LOCATIONS / SLV-EX
Intrinsically Safe Diesel & Fuel Level Transmitter Selection
Build an engineering request for atmospheric fuel tanks and classified leachate duties around the exact site classification, certificate scope and complete loop.
Two-wire 4–20 mA target · certificate and barrier review
Generator fuel tanks, diesel storage and classified leachate
Select the approved circuit before releasing the probe.
SLV-EX is an enquiry family, not a certified model designation. Do not install in a classified location until the exact supplied equipment and installation documents have been accepted for that site.
Define the configuration before the quotation
- Request 0.5–100 m liquid-head spans; define actual diesel, HVO, biodiesel or leachate composition.
- ATEX, IECEx and North American requirements are separate evidence paths. Supply the exact required marking and jurisdiction.
- Review certificate holder, full model designation, special conditions, barrier entity parameters, cable capacitance/inductance and control drawing.
THREE INPUTS THAT MAKE THE REVIEW USEFUL
Bring the installation into the specification.
Exact fuel blend, temperature, cable and seals
Approved barrier, supply, input load and control drawing
SPECIFY THE CONFIGURED ASSEMBLY
Range, materials and cable requirements for SLV-EX.
| Selection item | Request / option | Release check |
|---|---|---|
| Application and span | Fuel blend / leachate chemistry; request 0.5–100 m | Pressure span follows actual liquid head and density. |
| Required approval | Jurisdiction, zone/division, gas group, temperature class and ambient | Obtain the exact certificate, schedule, marking and special conditions. |
| Circuit | Two-wire 4–20 mA with approved associated apparatus | Check voltage/current/power and cable capacitance/inductance against control documents. |
| Wet construction | Qualified steel / titanium, compatible seals and oil-duty cable | No material option automatically inherits another model certificate. |
| Release documents | Exact supplied model, certificate holder and installation drawing | Own SLV enquiry code is not the certified marking; IECEx/ATEX/UL/CSA are not interchangeable. |
Locate ordinary indicators and controllers in the appropriate safe location; assess every component connected to the circuit.
Intrinsic safety needs the full loop assessed, not just a low-voltage supply or isolated barrier.
Leachate can combine corrosion and hazardous gases: obtain both process chemistry and area requirements.
Selection brief, not an issued manufacturing drawing, serial calibration certificate or blanket product approval. Confirm the exact release documents with the quotation.
INDEPENDENT TECHNICAL REFERENCES
Read the reference alongside its limits.
Independent reference: MicroSensor publishes model-specific approval information. Such evidence applies to the named equipment and conditions; it does not transfer to an SLV enquiry code or establish approval for a different circuit.
Third-party names identify independent sources. No affiliation, supplied-equipment approval or performance equivalence is claimed. Reviewed 17 November 2026.
READ THE INSTALLATION BEFORE THE SIGNAL
Keep a dry atmospheric reference and a stable sensor datum.
A fixed probe reads the liquid column above its diaphragm. Cable length covers the physical route to a dry termination. Neither a pipe-size label nor an image establishes the assembly dimensions.
Download installation & loop-load worksheet ↓CONFIGURE YOUR PROBE & TERMINATION
One complete specification.
One clear quote request.
Set liquid head, density, signal and the installed cable route. The configuration code carries these choices into your engineering request.
This code requests a configuration; the written quotation defines released dimensions, materials, approvals and availability.
Include this configuration in my RFQ ↗START WITH YOUR INSTALLATION
Four operating environments, four different selection decisions.
Chemical dosing tanks →
Specify chemical submersible probes from concentration, temperature, complete wetted materials and actual liquid density.
Generator fuel tanks →
Define low-head diesel tank measurement with fuel blend, usable level, cable route, area classification and generator input.
Groundwater & telemetry →
Plan groundwater pressure span, deployment cable, surveyed datum and low-power logger integration for borehole networks.
Lift stations & CSO →
Select a wastewater hydrostatic probe around rags, grease, turbulence, cleaning access, vent protection and pump-control acceptance.
KEEP THE WHOLE LOOP IN VIEW
From probe selection to dry cable termination.
Before you specify SLV-EX
Is this a released stock model?
SLV-EX identifies an enquiry configuration family. Ask for the exact configured datasheet, materials, drawing and calibration acceptance criteria before placing an order.
Can I order cable length independently from range?
Yes, specify both independently. Cable must cover the installed route and service allowance; measuring range covers liquid head above the probe. The quote confirms maximum immersion and cable load.
START WITH THE INSTALLATION
Liquid. Depth. Cable. Signal.
Send these four inputs to start a configuration review.