01 / WATER & ATMOSPHERIC TANKS / SLV-420
316L Water & Tank Submersible Level Transmitters
Specify a submerged gauge-pressure probe for clean water, storage tanks and compatible fuel applications.
316L body · qualified silicon / ceramic cell
Clean water tanks, reservoirs and wells
Match liquid chemistry, actual head above the probe and the PLC input.
Use in atmospheric vessels. Headspace pressure in a sealed tank adds pressure that this single vented probe cannot distinguish from level.
Define the configuration before the quotation
- 4–20 mA two-wire loop, 0–10 V or RS485 Modbus: request the required configuration.
- 0.25% / 0.5% FS accuracy targets require the configured range, temperature and calibration definition.
- Fuel and diesel require cable, seals, wetted-material and hazardous-area review.
THREE INPUTS THAT MAKE THE REVIEW USEFUL
Bring the installation into the specification.
Liquid density, operating temperature and cleaning chemicals
Supply, loop load, input type and required calibration record
Reviewing an existing tank-level probe?
WIKA LS-10 / IL-10, Endress+Hauser Waterpilot FMX21, Gems and Dwyer PBLT2 / SBLT2 are independent comparison references. Supply the exact installed model and datasheet. Span, wiring, dimensions, materials and required approvals need separate review; there is no claimed affiliation, certification transfer or universal 1:1 interchangeability.
SPECIFY THE COMPLETE INSTALLATION
One probe. A considered cable & termination kit.
Indicative accessory allowances in USD. Probe, freight and tax are excluded. Final compatibility and pricing require a written quote.
Need cable longer than 200 m? Enter the custom length and installation depth in your RFQ for a separate quote.
Include this configuration in my RFQ ↗KEEP THE WHOLE LOOP IN VIEW
From probe selection to dry cable termination.
Before you specify SLV-420
Is this a released stock model?
SLV-420 identifies an enquiry configuration family. Ask for the exact configured datasheet, materials, drawing and calibration acceptance criteria before placing an order.
Can I order cable length independently from range?
Yes, specify both independently. Cable must cover the installed route and service allowance; measuring range covers liquid head above the probe. The quote confirms maximum immersion and cable load.
START WITH THE INSTALLATION
Liquid. Depth. Cable. Signal.
Send these four inputs to start a configuration review.